DESCRIPTION

The CDM-T5 Desktop Chairperson Delegate comes with 5" LCD touch screen, a built-in loudspeaker, XLR connection for Xavtel's gooseneck microphones. The mic is available in different length, and also includes the connection for an external headset. The CDM-T5 allows for the full system control of the Senator System, from the capability of volumes changes, settings, paging and dialing if used in a distance or web-conference. The CDM-T5 has a mini USB connector placed at the right side of the unit, allowing for an easy-to-setup web-conferencing system with the use of optional AEC-Card of DCP1000 for a direct connection to any PC/Laptop. This unique feature allows every standard conference to become either a distance conferencing or a web conferencing system at the same time. No more integration or extra cabling of the system will be needed!

Other functions such as the selection of the conference modes, the selection of the GUI language, start/stop the USB recording function and all other system relevant parameters or levels can be adjusted via the CDM-T5. The CDM-T5 also offers a dedicated paging button, which allows for preselected zone paging. The dialer section has either a speed dial page or a numeric page to either recall preprogrammed connections via SIP Server (WAN) and direct to VoIP Phones or VoIP PBX systems, or to directly dial any number needed to make a distance conference connection. The CDM-T5 also offers 2 mini jack connectors next to the mini USB to connect any 3rd party headsets to the system.

FEATURES

System Features

• Up to 504 delegate units and 64 DCA660 amplifer can be connected to a single DCP1000
• Up to 32 DCP1000 can be connected via the 64 Ch. Xavnet digital audio network
• Each connected delegate unit will be processed individually and all parameters will be stored in the DCP1000
• Enhanced DSP functions such as 8 band PEQ, AGC, Feedback Suppressor, Gain sharing auto mixer and Voice Activated Gate etc.
• Optional AEC-Card (Acoustical Echo Cancellation) can be installed in the DCP1000, enabling SIP and VoIP for distance and web conferencing
• Special features like auto Mix-minus calibration, USB recording, 6Ch. simultaneous translation on board
• Interpretation integrated in same system, no optional IR system required
• Ease of use and setup with auto network deploy and special drag 'n' drop functions with the Senator Designer software

CDM-T5 Features

• Desktop Chairperson Delegate Unit with 5" touch screen
• Multi language interface (every language possible)
• Full system control unit including dialer, volume controls and conference management
• Built in loudspeaker with integrated AEC (Acoustical Echo Cancellation)
• USB audio connection for easy to use web-conferencing applications (needs AEC-Card installed into DCP1000)
• XLR connector connects to any of Xavtel’s gooseneck microphones (3rd party mics will also be supported)

SPECIFICATIONS

Electrical

• Mains power: 24VDC

• Power consunption: 3.5W @ max.

Audio

• Frequency response: 40 Hz ~ 18 kHz @ -1 dB
• THD+N: < 0.05 %(40 Hz ~ 18 kHz @ 0 dBu)

Sampling

• A/D-D/A converts: 24 Bit
• Sample rate: 48 kHz

XLR/Mic input

• Phantom power: 24V
• Input dynamic range: > 90 dB(40 Hz ~ 18 kHz @ 0 dB)
• Input gain range (fixed): 24 dB
• Maximum input level: -6 dB
• Input impedance: 4 kΩ

3.5 mm Female Phone Jack/Mic Input

• Input gain range (fixed): 9 dB
• Maximum input level: -6 dB
• Input impedance: 2kΩ

3.5 mm Female Phone Jack/Headphone Output

• Maximum output level: 0 dBu
  
• Output impedance: 25 Ω
• Delivering power: 150 mW
  

Built-In Loudspeaker Output

• Bandwidth: 40 Hz ~ 18 kHz
• Maximum output level: 90 dB SPL @ 1 foot

Front Panel

• 5'’ LCD touch screen
• 3 LED for recognizing status of microphone

RFID card reader for sign-in

• 3 pin standard XLR connector for microphone

Side Panel

• 3.5 mm female phone jack/mic input
• 3.5 mm female phone jack/headphone output

Rear Panel

• 5 pin XLR connector for connecting to DDB104 mic junction box

Colour

• PANTONE 7546C

Enviroment

• Operating temperature: 32°F ~ 104°F (0°C ~ 55°C)
• Storage temperature: -40°F ~ 158°F (-40°C ~ 70°C)
• Relative humidity: 5 % ~ 70 % non-condensing

Certifications

• CE marked, UL listed, RoHs compliant
  
  

Mechanical

• Dimensions (L x W x D) : 9-6/7” x 5-1/2” x 3-1/7”  (284mm x 174mm x 80 mm)

• Weight : 2.42lb (1.1 kg)

APPLICATIONS

• Schools
• Stores
• Shopping malls
• Hotels
• Train stations
• Universities
• Industrial sites

Case studies

DOCUMENT DOWNLOADS